+91 98300 11268 Purchase:suprabhatsarkar@crimsonpaints.com
Velvet(Acrylic Distemper)
Acrylic Distemper.

It is a premium Acrylic Distemper, because……

  • its based on acrylic co-polymer emulsion
  • smooth finish
  • fast drying
  • quick re-coatable
  • clean bright shades

Areas of application:

Interior surface of plaster, concrete, brickwork, asbestos.

Product Data:
Finish Smooth & Matte
Supply Viscosity Smooth Paste
Average Covering Capacity 150 - 160 sq.ft./kg/coat(as printed and puttied smooth surface by Brush)
Surface Dry Within 15 minutes.
Interval between Coats 3 hours minimum.
Thinnable Recommended Clean Tap/Potable Water.
Primer Recommended Crimson's SUPRIMO, Interior Water Thinnable Cement Primer is recommended.
Surface Preparation Ensure the substrate is dry and free from dirt, grease, oil & loose particles.
Method of Application After proper surface preparation Velvet Distemper can be applied by Brush, Spray or roller. After application of primer two or more coats of velvet Distemper to be applied allowing an interval of 3 to 4 hours between subsequent coats. The dilution ratio with water should be 100:60 by weight.