+91 98300 11268 Purchase:suprabhatsarkar@crimsonpaints.com
Royal Coat
Silicon Based Weather Guard Emulsion

Royal Coat is a premium exterior finish formulated with 100% acrylic emulsion with silicon. Its tough & durable. film effectively withstands expreme tropical conditions of high rainfall, humidity, heat & cold ensuring extra protection for exterior masonry, brickwork, rendering & concrete. Its state of the art copolymer systems specially formulated with light fast pigments and highly effective fungicides to keep exterior walls looking their best for years.

Areas of application:

Exterior masonry, brick work, rendering & concrete.

Product Data:
Finish Smooth & eggshell gloss
Supply Viscosity 10+/-2 poise
Average Covering Capacity 110-120 sq. ft/Lit./Coat
Interval between coats 4 hours minimum
Thinner recommended Clean tap/potable water
Shades Available Choose from a wide range of shades from our shade card.
Pack Available 500 ml/1 Lit/4 Lit/10 Lit/20 Lit

Surface Preparation: Remove dust, dirt, loose particles, grease, algae & fungi by wire brushing & wash with water jetting. Old painted surface should be sanded thoroughly. In case of newly constructed surface, a minimum 3 month curing time is necessary before painting. Apply cement sand plaster to fill crack & level surface. Give special attention to parapets & other horizontal surface which are specially susceptible to fungi or algae.

Method of Application: Thin 1 Lit. paint with 600 ml. clean fresh water & apply 2 coats of paint. For newly plastered surface use PRIME GUARD exterior primer. On horizontal surface or parapets use 3 coats. Avoid painting during rains.